← Products & brands

airinspace, France

Wall-i room pressure control and air-quality monitoring

Wall-i Pilot measures differential pressure and drives PLASMAIR or HEPA Guardian units to hold a set positive or negative pressure in a room, with alarms and data logging. Wall-i ISO, Wall-i Watch and OCTOPUS monitor particles and room conditions.

Overview

About Wall-i

A PLASMAIR Guardian or HEPA Guardian unit can be connected to a room to create positive or negative pressure, including airinspace BIOCAIR® isolation rooms. Wall-i Pilot turns this into a controlled system: it measures the differential pressure in real time, adjusts the unit's flow rate automatically to reach and hold the set point, and raises an alarm if pressure or flow drifts.

Wall-i Pilot is the BIOCAIR® control panel: a 7-inch colour touch screen on the outside of the room shows in real time the differential pressure, indoor temperature and relative humidity, the settable alarms, the blowing rate of the PLASMAIR unit and the pressure set point, with an alarm and warning log. Data can be downloaded as .txt or .csv over USB, and a ModBus connection links it to the hospital network and building management system. OCTOPUS adds a full indoor-air diagnosis: particle counting by ISO class and by size (0.3, 0.5, 1, 5 and 10 µm), PM1, PM2.5 and PM10, CO₂, total VOC, formaldehyde, temperature and humidity, with one year of data storage and BMS connection. The range also includes the Wall-i ISO particle counter and the Wall-i Watch sensor.

Key features

  • 7-inch colour touch screen with live differential pressure, temperature and humidity
  • Automatic control of PLASMAIR or HEPA Guardian flow to hold positive or negative pressure (±30 Pa)
  • Settable alarms with alarm and warning log
  • USB download (.txt / .csv) and ModBus link to the BMS
  • OCTOPUS: ISO class, particle sizes 0.3–10 µm, PM1/2.5/10, CO₂, tVOC, formaldehyde, 1-year storage
  • Wall-i ISO particle counter and Wall-i Watch sensor

Models

Photos and models

Wall-i Pilot

Wall-i Pilot

7-inch touch screen: pressure, temperature, humidity

Wall-i ISO

Wall-i ISO

Smart particle counter showing the ISO class

OCTOPUS

OCTOPUS

Indoor air-quality diagnosis: particles, CO₂, tVOC, formaldehyde

Where it is used

  • Negative pressure isolation rooms
  • Positive pressure protected rooms for immunocompromised patients
  • BIOCAIR® modular rooms
  • High-risk wards and laboratories
  • Air-quality audits and commissioning

What Capnova provides

  • Site assessment and sizing for each room
  • Supply, installation and commissioning
  • Training for clinical, cleaning and biomedical teams
  • Preventive maintenance and after-sales service
  • Protocols aligned with CDC guidance

Wall-i technical data

From the manufacturer's published information. Capnova confirms the current configuration and local registration status before every proposal.

Display
7-inch colour touch screen
Pressure range
±30 Pa maximum
Controls
PLASMAIR or HEPA Guardian blowing rate, automatically
Monitoring
Differential pressure, temperature, relative humidity; optional particle concentration (ISO class)
Data
Alarm and warning log; USB export .txt / .csv
Connectivity
ModBus to hospital network and BMS; RJ45 to air unit
Dimensions
H 23 × W 27.3 × D 7.8 cm
OCTOPUS
ISO class; 0.3, 0.5, 1, 5, 10 µm; PM1, PM2.5, PM10; CO₂; tVOC; formaldehyde; T; RH; 1-year storage

Questions

Common questions about Wall-i

We supply, install and support it for hospitals and clinics in the UAE (Dubai, Abu Dhabi, Sharjah), Saudi Arabia (Riyadh, Jeddah, Dammam), Qatar, Kuwait, Oman, Bahrain and Egypt.

How do you monitor and control isolation room pressure?

Wall-i Pilot measures the differential pressure between the room and its surroundings and automatically adjusts the flow rate of a PLASMAIR or HEPA Guardian unit to hold the set positive or negative pressure, with alarms and data logging.

Can a standard room be turned into a negative pressure room with a mobile unit?

Yes. A PLASMAIR Guardian or HEPA Guardian unit connected to the room creates negative or positive pressure, and Wall-i Pilot keeps it at the set point. For a fully enclosed isolation room, the same units are combined with BIOCAIR®.

How much does an isolation room pressure monitor cost?

Price depends on the configuration: Wall-i Pilot with one or more Guardian units, optional particle measurement and BMS connection. Capnova sends a quotation after reviewing the room.

Related

Works well with

Get a quote for Wall-i

Tell us about your facility and we will recommend the right quantity and configuration.